Battery Charger HS-1000

 

Use:

Higher demands of the car manufacturers resulted in the development of the HS-1000.

Today the chargers must not only be free from voltage peaks but also supply a very high performance to cover the power requirement of the more and more demanding on-board electrical system in the vehicle.

In cooperation with BMW, DaimlerChrysler and VW, ELEKTRON-BREMEN developed a charger meeting the highest demands.

With up to 70A, the trouble-free flashing of vehicles is guaranteed.

The handling is comfortable, menu-guided, operating errors are excluded. The HS-1000 is completely processor-controlled and offers highest safety by monitoring the charging process as well as all programmed characteristics.

Charging programmes for three specific vehicle types can be stored.

 

The HS-1000 is designed for worldwide use. Mains supply 90–260V, 50/60Hz.

Special approval USA, Canada and Mexico.

The 2,5m mains cable is detachable, i.e. exchangeable depending on the country. 6 languages are already programmed, further languages available on CD-ROM. The HS-1000 has the protection class IP 54, i.e. protected against dust and splash water. Cooling by natural convection (no fan). The sturdy aluminium housing is optimally qualified for intensive workshop operation. The HS-1000 is designed for 12V and 24V starter batteries (lead acid, lead calcium, maintenance free lead gel batteries, AGM batteries), equipped with 5m pluggable battery charging cables and all-insulated charging clamps.

Trolley and wall holder are optional. Of course also this ELEKTRON-BREMEN HS-charger offers support and PSU mode.

Not only the performance of the HS-1000 from ELEKTRON-BREMEN.